Chenbro SR107 Series - Installation - Manual (Page 5)

SR209/105/107 USER’S GUIDE
Revision: 1.0 5
1.1 Introduction
This document will guide you for Chenbro server cases- SR107, SR105,
and SR209. They are designed to address the demand of performance
and thermal management, and deliver user friendly mechanical design
as well as configuration flexibilty on data storage.
Additinally, users are able to benefit from their rackable feature. The
SR209 and SR105 can be racked by tray, while the SR107 supports
rackmount solution of slide rails. The specification table below will let
you have general ideas about these server cases.
Model Number SR107 SR105 SR209
Dimension(mm) 620x220x425 533x198x425 465x198x425
M/B Size(max.) 12” x13” 12” x13” 12”x10.5”
3 5.25” Bay 3
1 3.5” Bay 0
8 HDD Trays 4
Ultra 320 SCSI& Serial ATA
Cooling fan 3x120mm 1x120mm, 92mm, 80mm
Front USB 2 2
PSU Support Single PS/2 Single PS/2, N+1 Redundant
Rackmount by slide rail by tray by tray
Backplane
3
1
8
2
1.2 Naming Rule
Due to market demand and segement, Chenbro coninutes to develop
the new front bezels for these chassis body. With various front bezel,
the product number will be different. So, to know the naming policy, it
will help you to identify which model your are talking about.
The model number is composed by three parts. They are server case
family code, chassis body, and front bezel serial number. The following
example will explain this rule for you in detail.
Example: SR10769
SR : pedestal server case family code
107: 3 digits, chassis body
69 : 2 digits, front bezel serial number
When you go through this document, the model numbers SR107,
SR105, and SR209 will be used to stand all front bezels not for specific
one.