Chenbro SR107 Series - Installation - Manual (Page 34)

SR209/105/107 USER’S GUIDE
Revision: 1.0 3 4
3.7 Installing the floppy drive, SR107
Loosen two screws(1) fastened
on side panel of the FDD carrier.
Insert the hooks, pointed by
arrowed in Figure 3-25, into
mounting holes of floppy drive.
Push FDD down into the carrier,
and then secure FDD with the two
screws you have removed earier.
Insert the drive carrier with FDD
in the drive bay until you hear a
crack sound.
1
Figure 3-24
Figure 3-25
Figure 3-26
Figure 3-27
(a).
(b).
(c).
(d).