Bray 70 Series SERVO PRO - Manual (Page 4)

2
BRAY Series 70 Servo Pro
Operation and Maintenance Manual
1.1 H
azard
-
free use
This device left the factory in proper condition to be safely
installed and operated in a hazard-free manner. The
notes and warnings in this document must be observed
by the user if this safe condition is to be maintained and
hazard-free operation of the device assured.
Take all necessary precautions to prevent damage to the
Servo Pro due to rough handling, impact, or improper
storage. Do not use abrasive compounds to clean the
Servo Pro, or scrape its surfaces with any objects.
Configuration and calibration procedures are described
in this document. Proper configuration and calibration is
required for the safe operation of the Servo Pro.
The control system in which the Servo Pro is installed
must have proper safeguards to prevent injury to
personnel, or damage to equipment, should failure of
system components occur.
This document does not cover every detail about
every version of the product described. It cannot take
into account every potential occurrence in installation,
operation, maintenance and use.
If situations transpire that are not documented in sufficient
detail, please request the required information from
the Bray Distributor or Representative responsible for
your area.
1.2 Q
ualified
P
ersonel
A qualified person in terms of this document is one who is
familiar with the installation, commissioning and operation
of the device and who has appropriate qualifications,
such as:
• Is trained in the operation and maintenance of
electric equipment and systems in accordance with
established safety practices
• Is trained or authorized to energize, de-energize,
ground, tag and lock electrical circuits and equipment
in accordance with established safety practices
• Is trained in the proper use and care of personal
protective equipment (PPE) in accordance with
established safety practices
• Is trained in first aid
• In cases where the device is installed in a potentially
explosive (hazardous) location – is trained in
the operation, commissioning, operation and
maintenance of equipment in hazardous locations
s
afety
i
nstructions
- d
efinition of
t
erms
read and folloW tHese instructions
saVe tHese instructions
WARNING
indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
NOTICE
used without the safety alert symbol indicates a potential situation which, if not
avoided, may result in an undesirable result or state, including property damage.
!
!