AVTECH Room Alert 3E Monitor (RA3E-ES0-BAS) - Manual (Page 9)

Room Alert 3E
AVTECH Software, Inc. 5
Ethernet Port
An RJ-45 PoE-enabled port connects Room Alert 3E
to your network via an RJ-45 network cable.
Back
Reset Button
A small push button resets Room Alert 3E to factory
default settings.
Switch Sensor Channel
A pair of dry contacts connects Room Alert 3E to any
AVTECH switch sensor or dry contact on a device
(e.g., HVAC, generator, pump, fan, etc.) via standard
speaker wire or low-voltage 2-wire cable.
Digital Sensor Port
A standard RJ-11 jack connects any AVTECH digital
sensor or Light Tower & Relay Adapter to your Room
Alert 3E via a standard RJ-11 (straight through)
telephone cord.
For more information about AVTECH sensors and accessories,
please refer to the
Appendix at the back of this manual or visit the
Sensors and Accessories sections of AVTECH.com .
NOTE