AVTECH Room Alert 3E Monitor (RA3E-ES0-BAS) - Manual (Page 17)

Room Alert 3E
AVTECH Software, Inc. 13
IP Address Configuration—Static IP
To assign a static IP address:
1. Select Use The Following IP Configuration .
2. In “IP Address,” enter the new static IP address.
3. In “Subnet Mask,” enter the subnet mask.
4. In “Default Gateway,” enter the gateway IP address.
5. In “DNS Server IP,” enter the DNS server IP address.
6. Click Accept Changes at the bottom of your screen.
7. Click Save Settings in the navigation bar to the left of your screen.
TIP
Make sure that you do not use an IP address that is already
assigned to another device. Also, set the IP address within your
current subnet range; otherwise, you may not be able to
discover your Room Alert 3E.