AVTECH Room Alert 3E Monitor (RA3E-ES0-BAS) - Manual (Page 21)

Room Alert 3E
AVTECH Software, Inc. 17
Simple Network Management Protocol (SNMP)
Because your Room Alert 3E is fully SNMP-compliant, you have the option to monitor it with a
3
rd -party monitoring application capable of performing SNMP queries. You may configure the
Room Alert 3E to send SNMP Traps in response to a change in alarm states to up to three host
systems running 3
rd -party SNMP monitoring applications.
If you use a 3 rd -party SNMP monitoring application:
• Obtain the Room Alert 3E MIB files through your customer account at
AVTECH.com/Downloads and load them into your SNMP monitoring application.
Otherwise, your application cannot properly translate the data it receives in the
SNMP Trap.
• Ensure that your application uses SNMPv1.
• Note that your Room Alert communicates with your SNMP monitoring application
using the standard port for the SNMP protocol, 161.
Navigate to Settings Æ SNMP to open the “SNMP Settings” screen.