AVTECH Room Alert 3E Monitor (RA3E-ES0-BAS) User Manual
Page 28
Room Alert 3E
24
AVTECH Software, Inc.
Advanced Sensor Configuration
Check
Trigger Alarm If Sensor Is Disconnected?
if you want to receive an alert if the
external digital sensor becomes disconnected from the Room Alert 3E. This check box is blank
by default.
Alarm Options
You need to configure the “Alarm Options” page only if you use a Light Tower & Relay Adapter
with your Room Alert 3E, which gives you the option to add an AVTECH Light Tower, Light
Tower w/Audio or Relay Switch Sensor. You may also connect a low-voltage device directly to
the available relay port.
Shown here is a sample configuration:
Room Alert
3E
+
RJ-11
Cable
+
Light Tower
& Relay Adapter
+
Light Tower
Custom Cord
+
Light Tower
w/Audio
The Light Tower w/Audio in this configuration can be replaced with
a standard Light Tower or Relay Switch Sensor. For more
information about AVTECH sensors and accessories, please refer
to the
Appendix
at the back of this manual or visit the Sensors &
Accessories sections of
AVTECH.com
.
NOTE