AVTECH Room Alert 3E Monitor (RA3E-ES0-BAS) - Manual (Page 10)

Room Alert 3E
6 AVTECH Software, Inc.
B
A
How To Install Your Room Alert 3E
Step 1: Connect your Room Alert 3E hardware.
If your network is Power over Ethernet (PoE) enabled . . .
• Connect one end of a standard Ethernet cable to the
Room Alert 3E’s Ethernet port.
• Connect the other end to a PoE-enabled network jack.
That’s it! Your Room Alert 3E is now powered and discoverable on your network.
If your network is not Power over Ethernet (PoE) enabled . . .
A. Connect to your network first.
• Connect one end of a standard Ethernet cable to the
Room Alert 3E’s Ethernet port.
• Connect the other end to a network jack.
B. Then connect to a power source.
• Plug one end of AVTECH’s International Power
Adapter into the Room Alert 3E’s power port.
• Plug the other end into a surge-protected power source.
Your Room Alert 3E is now powered and discoverable on your network!
Use only AVTECH’s International Power Adapter. Others could
damage the Room Alert 3E and void your warranty. If you don’t
have one, please visit our online store at
AVTECH.com .
NOTE