AVTECH Room Alert 3E Monitor (RA3E-ES0-BAS) - Manual (Page 16)

Room Alert 3E
12 AVTECH Software, Inc.
Network
Navigate to Settings Æ Network to open the “Network Settings” screen.
Device Name
To rename your Room Alert 3E:
3. Select the automatically-assigned name in “Device Name” and enter a new one of up to
15 alphanumeric characters.
4. Click Accept Changes at the bottom of your screen.
5. Click Save Settings in the navigation bar to the left of your screen.
IP Address Configuration—DHCP
To obtain an IP address automatically using DHCP:
1. Select Obtain IP Address Automatically .
2. Click Accept Changes at the bottom of your screen.
3. Click Save Settings in the navigation bar to the left of your screen.