Atec Rohde-Schwarz-ESRP Series - Manual (Page 16)

Version 01.01, January 2013
16 Rohde & Schwarz R&S ® ESRP EMI Test Receiver
Options
R&S ® FSV-B9 tracking generator (spectrum analyzer mode)
Frequency
Frequency range
R&S ® ESRP3 9 kHz to 3.6 GHz
R&S ® ESRP7 9 kHz to 7 GHz
Frequency offset
Setting range
±1 GHz
Setting resolution 1 Hz
Spectral purity
SSB phase noise
frequency = 1000 MHz,
carrier offset = 100 kHz –90 dBc (1 Hz) typ.
Level
Setting range
normal mode, 9 kHz ≤ f < 100 kHz –60 dBm to–-10 dBm, in 0.1 dB steps
normal mode, f ≥ 100 kHz –60 dBm to 0 dBm, in 0.1 dB steps
with AM, I/Q, 9 kHz ≤ f < 100 kHz –60 dBm to –20 dBm, in 0.1 dB steps
with AM, I/Q, f ≥ 100 kHz –60 dBm to –10 dBm, in 0.1 dB steps
Max. deviation of output level frequency = 64 MHz, +20 °C to +30 °C,
output level = –10 dBm,
frequency offset = 0 Hz, modulation = off < 1 dB
Frequency response output level = –10 dBm, referenced to level at 64 MHz, 100 kHz ≤ f ≤ 7 GHz,
frequency offset = 0 Hz, modulation = off
9 kHz ≤ f < 100 kHz < 4 dB
100 kHz ≤ f ≤ 7 GHz < 3 dB
Dynamic range RBW = 1 kHz, f > 10 MHz 110 dB
Harmonics, non-harmonic spurious output level = –10 dBm –30 dBc
Modulation
Modulation format
external I/Q, AM, FM
AM f > 10 MHz
Modulation depth 0 % to 100 %
Modulation frequency range 0 Hz to 1 MHz
FM f > 10 MHz
Frequency deviation 0 Hz to 10 MHz
Modulation frequency range 0 Hz to 10 kHz
RF output
Connector
N female, 50 Ω
VSWR 1.3, nominal
TG I/AM IN
Connector
BNC female, 50 Ω
Input voltage 1 V (V
pp
)
TG Q/FM IN
Connector
BNC female, 50 Ω
Input voltage 1 V (V
pp
)