Atec Rohde-Schwarz-ESRP Series - Manual (Page 10)

Version 01.01, January 2013
10 Rohde & Schwarz R&S ® ESRP EMI Test Receiver
Level display (analyzer mode)
Logarithmic level axis
1 dB to 200 dB, in steps of 1/2/5
Linear level axis 10 % of reference level per level division,
10 divisions or logarithmic scaling
Number of traces 6
Trace detector max. peak, min. peak, auto peak (normal),
sample, RMS, average, quasi-peak,
CISPR-average, RMS-average
Trace functions clear/write, max. hold, min. hold, average,
view
Setting range of reference level –130 dBm to (–10 dBm + RF attenuation
– RF preamplifier gain), in steps of
0.01 dB
Units of level axis logarithmic level display dBm, dBµV, dBmV, dBµA, dBpW
linear level display µV, mV, µA, mA, pW, nW
Level display (receiver mode)
Level display
analog bargraph display, separately for each
detector
digital numeric; 0.01 dB resolution
Detectors max. 4 selectable max. peak, min. peak, RMS, average,
quasi-peak, CISPR-average,
RMS-average
Units of level axis dBm, dBµV, dBmV, dBµA, dBpW, dBpT
RF spectrum
Logarithmic level axis 10 dB to 200 dB, in steps of 10
Frequency axis linear or logarithmic
Number of traces 6
Detectors normal scan max. peak, min. peak, RMS, average,
quasi-peak, CISPR-average,
RMS-average
time domain scan 8 max. peak, min. peak, average,
quasi-peak, CISPR-average,
RMS-average
Spectrogram display (analyzer mode)
Result display
color-graded bitmap
Spectrogram bitmap color depth 240 colors
Dynamic range covered by bitmap colors selectable, up to 200 dB (nom.)
History depth max. 100 000 frames
Recording mode single trace, continuous, frame count
Trace detector max. peak, min. peak, sample, RMS,
average
Number of markers 16
Marker readout frequency, time/frame number, level
8 Requires R&S ® ESRP-K53 option.