Atec EuroSMC-Mentor-12 - Manual (Page 3)

EASY TO USE
The Mentor 12 is controlled via a touch screen panel and a rotary
selector. An external mouse and keyboard can also be used if
desired. The entire test process and test results are immediately
displayed in numerical and graphic forms, with a complete set of
feedback indicators and a real-time representation of power vectors.
You only need turn on the Mentor 12, connect it to the relay, and
select the desired test on the menu. You will see the process and
the results on the screen. Now, name it and save it so you can repeat
the test or examine the results in the future.
If you have a COMTRADE file stored on a USB pen drive, just plug
it into the Mentor 12 and it will reproduce the signal onto
the relay in a matter of seconds.
The VGA connector can be used to
hook up external monitors or
projectors for a larger viewing
surface or for training purposes.
Programmable Auxiliary DC supply with electronic
protection.
High-accuracy voltage / current measurement input.
Connectivity set with 6 low level signal outputs, GPS
antenna, digital expansion port, Centronics, RS-232,
Ethernet LAN, 2xUSB, VGA, Mouse, Keyboard.
Two three-channel bays for up to six voltage amplifiers
with independent neutral, reversible to current mode.
12 binary inputs with automatic dry/voltage contact
detection. Software-configured logical processing.
8 binary outputs. Software-configurable relay or open
collector modes.
Two three-channel bays for up to six isolated current
amplifiers with independent neutral.
Fuse-protected AC power input.
3
UNIQUE FEATURES
STAND-ALONE FUNCTIONALITY, WITHOUT PC
EASY AND INTUITIVE TOUCH SCREEN
UP TO 12 CURRENTS AND UP TO 6 VOLTAGES
MODULAR CONCEPT, ADAPTED TO USER NEEDS
VOLTAGES CONVERTIBLE TO CURRENT
ADVANCED BUILT-IN TEST TOOLS
IEC 61850 TESTING CAPABILITIES
LOWER MAINTENANCE COST
10 YEARS WARRANTY
◼ Single-box solution for testing all types of relays and protection schemes.
◼ Modular construction, User-replaceable Plug & Play amplifier modules.
◼ Field upgradeable from 6 up to 12 power outputs, at any time, to test any type of
protection scheme.
◼ Manual as well as automated testing, stand alone testing without PC.
◼ Voltage channels are convertible to current for differential relay testing.
◼ Intuitive and easy to use touch screen interface, for fast testing, no need for special
training.
◼ Built-in advanced test tools, with graphical templates.
◼ Powerful Relay Test and device management software - ROOTS.
◼ State of the art amplifier technology.
◼ Fully isolated amplifiers with independent neutral.
◼ Software-controlled combination of channels, in serial or parallel, to meet higher current,
voltage and power requirements.
◼ 3-kHz bandwidth transient testing from USB memory in COMTRADE format.
◼ Ethernet, USB and RS-232 communications.
◼ Free lifetime software upgrades via internet.
◼ End-to-end testing with GPS synchronization.
Small foot print, easy access to all
connections and adjustable screen
Mentor 12 is supplied with standard 10 Years Warranty, without
additional cost. The Mentor 12 is designed and built to assure a very
long life cycle, both in terms of updateable hardware and firmware,
as in a rough electromechanical construction and high quality
manufacturing process.
Mentor12 EN v3_SMC fichas 09/08/13 15:09 Página 3