Atec EuroSMC-Mentor-12 - Manual (Page 15)

SUPPLIED ACCESSORIES
Complete set of test leads, 4 mm shrouded / straight stackable
banana plugs (28-40 cables)
1 power cord 250 V/ 16 A
2-m / 6.5 ft. twisted-pair Ethernet cable
RS-232 (ActiveSync®) cable
1 set of assorted spare fuses (19-32)
1 PS2 adapter for keyboard and mouse
2 adapters for low level outputs
1 USB Pen Drive
1 soft organizer bag for cables and accessories
1 User’s manual
Certificate of calibration
Sturdy ABS transport case with wheels and extensible handle
15
TYPICAL MENTOR 12 HARDWARE CONFIGURATIONS
OPTIONAL SOFTWARE
MODEL’S NAME OUTPUT CHANNELS TYPICAL APPLICATIONS
3v 3i 6
3 voltage (0-150 V or 0-5 A) + 3 current
channels (0-25 A), with 100 VA each.
Single- and three-phase testing of any type of relay, transducers and meters. Up to 600 VA total output power. Full-range
transient playback. Provides 6 currents.
4v 3i 7
4 voltage (0-150 V or 0-5 A) + 3 current
channels (0-25 A), with 100 VA each.
Adequate for synchronizing relays. Direct three-phase testing with neutral voltage elements and a current up to 5 A.
Capable for testing three phase differential relays.
4v 4i 8
4 voltage (0-150 V or 0-5 A) + 4 current
channels (0-25 A), with 100 VA each.
A fourth current supply up to 25 A for devices with neutral element. Single phase test up to 100 A with 400 VA of power.
Testing single phase differential relays with up to 25 A.
3v 6i 9
3 voltage (0-150 V or 0-5 A) + 6 current
channels (0-25 A), with 100 VA each.
Three- phase electromechanical relays. Direct testing of differential relays with triple windings, maintaining the connection
class. Up to 50A current per channel.
6v 3i 9
6 voltage (0-150 V or 0-5 A) + 3 current
channels (0-25 A), with 100 VA each.
Calibration of low voltage measurement converters and energy meters. Fault tests of high impedance relays, directional
detection of differential neutral with high voltage setting and moderate current setting.
4v 6i 10
4 voltage (0-150 V or 0-5 A) + 6 current
channels (0-25 A), with 100 VA each.
Single- and three-phase testing with high current settings Differential relay testing. Provides up to 10 currents.
6v 6i 12
6 voltage (0-150 V or 0-5 A) + 6 current
channels (0-25 A), with 100 VA each.
Testing of 2 relays simultaneously. Three-phase transformer differential testing on quadruple windings. High current and
high power output needs. Two full line endings to perform end to end testing.
ROOTS ROOTS Software, with optional licensed modules: Overcurrent, Distance, Differential, new modules
MENTOR STT Smart Test Tools license for MENTOR 12
MENTOR IEC-61850 IEC 61850 Compliant Test Interface
MENTOR GPS GPS board, antenna, extension cable
MENTOR-IRIGB IRIG-B adapter for MENTOR 12
MENTOR-MD1V Additional Voltage Amplifier
MENTOR-MD1C Additional Current Amplifier
MENTOR-MD3V 3-voltage amplifier module
MENTOR-MD3C 3-current amplifier module
MENTOR-IR Optical pickup for non-visible infrared LED with BNC connector
MENTOR-VIS Optical pickup for visible light with BNC connector
MENTOR-DSK Induction disk sensor with suction mount
BAG 06
Lightweight bag for MENTOR 12. Ideal option for short-distance transportation. 20-
mm padding for adequate protection inside the car’s trunk, adding no significant
weight to the equipment. The screen, connections panel and ventilation grid can be
uncovered, so there is no need to extract the Mentor 12 from the bag for testing.
OPTIONAL ACCESSORIES
Mentor12 EN v3_SMC fichas 09/08/13 15:10 Página 15