Signals – Atec Rohde-Schwarz-UPV User Manual
Page 18
Version 03.00, August 2011
18
Rohde & Schwarz R&S
®
UPV Audio Analyzer
Signals
All signals 24 bit, full scale.
General characteristics
for sine, stereo sine, DFD and MOD DIST
distribution
Gaussian, triangular, rectangular
Dither
level
0.5 LSB to 1 FS
internal clock
±10 ppm
Frequency error
relative to clock rate
±1 ppm
DC offset
0 to ±1 FS adjustable
Sine
Frequency range
0.1 Hz to 49.9 % of sampling rate
Inherent distortion (THD)
14
< –155 dB
Sweep parameters
frequency, level
Stereo sine
Frequency range
0.1 Hz to 47.9 % of sampling rate
Frequency
adjustable for each channel
Phase
same frequency in both channels
–360° to +360°
Level
adjustable for each channel
or channel ratio 2/1
Sweep parameters
frequency and level of channel 1
MOD DIST
for measuring the modulation distortion
30 Hz to UF/8
Frequency range
lower frequency (LF)
upper frequency (UF)
8 × LF to 47.9 % of sampling rate
Level ratio (LF:UF)
selectable from 10:1 to 1:1
Inherent distortion
14
level LF:UF = 4:1
with 1 LSB triangular dither
< –142 dB
Sweep parameters
upper frequency, level
DFD
for measuring the difference frequency distortion
difference frequency
80 Hz to 2 kHz
Frequency range
mean frequency
200 Hz
to 20.90 kHz
Inherent distortion
14
DFD
d
2
, DFD d
3
with 1 LSB triangular dither
< –155 dB
Sweep parameters
mean frequency, level
Sine burst, sine
2
burst
Burst time
1 sample up to 60 s, 1-sample-resolution
Interval
burst time up to 3600 s,
1-sample-resolution
Low level
0 to burst level, absolute or referenced to
burst level (0 for sine
2
burst)
Sweep parameters
burst frequency, level, time, interval
Noise
Distribution
Gaussian, triangular, rectangular
Arbitrary waveform
Memory depth
max. 256 ksample
Clock rate
sampling rate of generator
File format
*.arb
14
Total inherent distortion of analyzer and generator.