Atec Agilent-E9300A - Manual (Page 8)

8
EPM series power meters
E4418B: Single channel EPM series
power meter
E4419B: Dual channel EPM series
power meter
Options available
Power
Option E441xB-001: Mains power and
internal rechargeable battery
Connectors
Option E441xB-002: Parallel rear panel
sensor input connector(s) and front
panel reference calibrator connector
Option E441xB-003: Parallel rear
panel sensor input connectors and
rear panel reference calibrator con-
nector
Calibration documentation
Option E441xB-A6J: ANSI Z540 compli-
ant calibration test data with mea-
surement uncertainties
Documentation
A hard copy and CD version of the
English language User’s Guide and
Programming Guide is provided with
the EPM power meter as standard. A
selection can be made to delete the
hard copy
Option E441xB-OBO: Delete manual set
Additional documentation
Selections can be made for the local-
ization of the User’s Guide, and an
English language Service Manual
Option E441xB-915: English language
Service Manual
Option E441xB-916: English language
manual set (hard copy Users Guide
and Programming Guide)
Option E441xB-ABD: German localiza-
tion (hard copy Users Guide and
English Programming Guide)
Option E441xB-ABE: Spanish localiza-
tion (hard copy Users Guide and
English Programming Guide)
Option E441xB-ABF: French localiza-
tion (hard copy Users Guide and
English Programming Guide)
Option E441xB-ABJ: Japanese localiza-
tion (hard copy Users Guide and
English Programming Guide)
Cables
Option E441xB-004: Delete power
sensor cable
Additional cables
11730A: Power sensor and SNS noise
source cable, length 1.5 meters (5 ft)
11730B: Power sensor and SNS noise
source cable, length 3 meters (10 ft)
11730C: Power sensor and SNS noise
source cable, length 6.1 meters (20 ft)
11730D: Power sensor cable, length
15.2 meters (50 ft)
11730E: Power sensor cable, length
30.5 meters (100 ft)
11730F: Power sensor cable, length 61
meters (200 ft)
Accessories
Option E441xB-908: Rackmount kit
(one instrument)
Option E441xB-909: Rackmount kit
(two instruments)
34131A: Transit case for half-rack 2U
high instruments
34141A: Yellow soft carry/
operating case
34161A: Accessory pouch
E9287A
1 : Spare battery pack for the
EPM power meter
Complementary equipment
11683A: Range calibrator
Verifies the accuracy and linearity of
the EPM series power meters.
Outputs corresponding to meter
readings of 3, 10, 30, 100 and 300
µW and 1, 3, 10, 30 and 100 mW are
provided. Calibration uncertainty is
±0.25% on all ranges.
Service options
Warranty
Included with each EPM series
power meter
2 is a standard 12
month return to Agilent warranty
and service plan. For warranty and
service of 5 years, please order 60
months of R-51B.
R-51B: Return-to-Agilent warranty
and service plan
Calibration 3
For 3 years, order 36 months of the
appropriate calibration plan shown
below. For 5 years, specify 60 months.
R-50C-001: Standard calibration plan
R-50C-002: Standard compliant
calibration plan
The E-series and 8480 series power
sensors have a 12 months return to
Agilent warranty and service plan.
For more information, contact your
local sales and service office.
1. Only for EPM series power meter with Option
E441XB-001 installed.
2. For Option E441XB-001, the 36 month warranty
does not apply to the E9287A battery pack.
3. Options not available in all countries.