beautypg.com

Atec Agilent-E9300A User Manual

Page 7

background image

7

Battery Option 001 operational
characteristics

1

The following information describes
characteristic performance based at
a temperature of 25°C unless other-
wise noted.

Typical operating time: up to 3.5
hours with LED backlight on; up to
5.5 hours with LED backlight off
(E4418B power meter).

Charge time: 2 hours to charge fully
from an empty state; 50 minutes
charging enables 1 hour of operation
with LED backlight on; 35 minutes
charging enables 1hr operation with
LED backlight off. Power meter is
operational whilst charging.

Service life: (to 70% of initial
capacity at 25°C): 450 charge/
discharge cycles

Chemistry: nickel metal hydride

Weight: 1kg

Environmental characteristics

General conditions: Complies with
the requirements of the EMC
Directive 89/336/EEC. This includes
Generic Immunity Standard EN
50082-1: 1992 and Radiated
Interference Standard EN 55011:
1991/CISPR11:1990, Group 1 -
Class A.

Operating environment

Temperature: 0°C to 55°C.
Maximum humidity: 95% at 40°C
(non-condensing).
Minimum humidity: 15% at 40°C
(non-condensing).
Maximum altitude: 3000 meters
(9840 feet).

Storage conditions

Storage temperature:
–20°C to +70°C.

Non-operating maximum humidity:
90% at 65°C (non-condensing).

Non-operating maximum altitude:
15240 meters (50,000 feet).

General

Dimensions: The following dimensions
exclude front and rear protrusions.

212.6 mm W x 88.5 mm H x 348.3 mm D
(8.5 in x 3.5 in x 13.7 in)

Weight

Net: E4418B: 4.0 kg (8.8 lb).
E4419B: 4.1 kg (9.0 lb).

Shipping:
E4418B: 7.9 kg (17.4 lb).
E4419B: 8.0 kg (17.6 lb).

Remote programming

Interface: GBIB interface operates
to IEEE 488.2. RS-232 and RS-422
serial interface supplied as standard.

Command language: SCPI standard
interface commands. 436A and 437B
code compatible (E4418B only);
438A code compatible (E4419B
only).

GPIB compatibility: SH1, AH1, T6,
TE0, L4, LE0, SR1, RL1, PP1, DC1,
DT1, C0.

Non-volatile memory

Battery: Lithium polycarbon
Monoflouride, approximate lifetime
5 years at 25°C.

Safety

Conforms to the following product
specifications:
EN61010-1: 1993/IEC 1010-1: 1990
+A1/CSA C22.2 No. 1010-1: 1993
EN60825-1: 1994/IEC 825-1: 1993
Class 1 Low Voltage Directive
72/23/EEC

Accessories supplied

Power sensor cable

11730A: E4418B has one
1.5 meter (5 ft) sensor cable.
E4419B has two 1.5 meter (5 ft)
sensor cables.
Power cord: One 2.4 meter
(7.5 ft) cable. Power plug matches
destination requirements.

1. Characteristics describe product performance

that is useful in the application of the product,
but is not covered by the product warranty.