Atec Dewetron-DEWE2_DatatsheetЙ - Manual (Page 38)

www.dewetron.com
38
Isolated high speed CAN interface
Input types High speed, (low speed and single wire with optional converter)
Listen only and programmable termination
Direct interface to CPAD2 module series
TRION-CAN
TRION-CAN specifications
Input channels
2 with DSUB 9 connector (TRION-CAN-2-D)
4 with DSUB 9 connector (TRION-CAN-4-D)
Specification CAN 2.0B
Physical layer High speed, (low speed and single wire with optional converter)
Listen only mode Supported
Termination Programmable: high impedance or 100 Ω
Galvanic isolation 500 V
DC
Bus pin fault protection ±36 V
CAN Transceiver SNHVD235
Sensor power supply (per module) 5 V (600 mA) and 12 V (600 mA)
Power consumption Typ. 5 W + excitation power
Connector SUB-D-9 plug
Weight Appr. 190 g
TRION-CAN-4-D TRION-CAN-2-D
Cables for TRION-CAN modules
TRION cables
Connector Termination Length TRION modules
TRION-CBL-D9OE-05-00 DSUB-9 open end 5 m TRION-CAN-x-D
ADAP-CAN-LS-HS ADAP-LIN-CAN
Options
ADAP-CAN-LS-HS DSUB-9 DSUB-9, Adaptor from low-speed CAN to high-speed CAN
ADAP-LIN-CAN
DSUB-9
DSUB-9, Isolated LIN to CAN adaptor. Requests data from LIN
as a LIN-master and outputs the data to CAN
Options
Series Modules