Atec Anritsu_MT8801C User Manual
Page 5
5
Wide-Band Power Meter
The power meter with built-in thermocouple power
sensor can accurately measure power between 0 and
+40 dBm.
Receiver Sensitivity Measurement
This function displays the error count and error rate in
the RF input or DATA/CLOCK input measured signal.
Adjacent Channel Power Measurement
The MT8801C can measure adjacent channel power
for each communication system at high speed.
Call Processing Function
The MT8801C acts as a pseudo base station permit-
ting to judge pass/fail for registration, origination,
termination, communication, handover (PHS: TCH
switching type only), disconnection from network and
disconnection from mobile station at the sequence
monitor screen.
Bit error rate measurement (IS-136A)
Adaptive BER Receiver Testing
For DECT measurements, there are one FER and two
BER measurements. The two measurements, one
quick and the other full, allow the number of samples
required to conclude a test to be adapted to suit the
receiver being tested.
Output RF spectrum measurement (GSM)
Example of power measurement
Sequence monitor display (GSM)
Example of bit error rate measurement (DECT)