Atec Anritsu_MT8801C - Manual (Page 14)

Accuracy (bandwidth: Ͻ 30 kHz)
Unbalanced output: ±0.5 dB (frequency: 1 kHz, output level: Ն 1 mV)
±1 dB (frequency: 20 Hz to 20 kHz, output level: Ն 1 mV)
Floating output: ±2 dB (frequency: 1 kHz, output level: Ն 1 mV)
Output impedance
AF Generator
MAIN output: 600
Ω
, 50
Ω
selectable (unbalanced, BNC connector)
DUT interface microphone output: 600
Ω
, floating
Distortion: Ͻ –50 dBc (bandwidth: Ͻ 30 kHz, frequency: 1 kHz, output level: 1 V)
Ͻ –45 dBc (bandwidth: Ͻ 30 kHz, frequency: 20 Hz to 20 kHz, output level: 1 V)
Noise generator: White noise passed through a weighting filter (conforming to ITU-T Rec. G.227)
Frequency range: 300 kHz to 3 GHz
RF power meter Input range: 0 to +40 dBm (MAIN connector)
Accuracy: ±10% (after zero calibration)
Frequency range: 10 MHz to 3 GHz
IF level meter
Input range: 0 to +40 dBm (MAIN connector)
Accuracy:
Յ 10% (after calibration with internal RF power meter)
Linearity: ±0.3 dB (0 to –30 dB)
Frequency range: 10 MHz to 3 GHz
Input level range: –15 to +40 dBm (MAIN connector), –40 to +20 dBm (AUX connector)
Frequency counter Resolution: 1 Hz
Accuracy: ±(reference oscillator accuracy + 10 Hz)
Method: IF frequency counting (bandwidth: ±30 kHz)
FM
Frequency range: 10 MHz to 3 GHz
Input level range: –15 to +40 dBm (MAIN connector), –40 to +20 dBm (AUX connector)
Filters (3 dB cut-off frequency): HPF (300 Hz, 50 kHz), LPF (3 kHz, 15 kHz)
Deviation: 0 to 20 kHz
Demodulation frequency: 20 Hz to 20 kHz
Accuracy: 1% + residual FM (demodulation frequency: 1 kHz)
Frequency response: ±0.5 dB (referenced to 1 kHz)
Residual FM: 8 Hz-rms (demodulation frequency: 0.3 to 3 kHz)
Distortion: 0.3% (modulation frequency: 1 kHz, demodulation bandwidth: 0.3 to 3 kHz)
øM
Frequency range: 10 MHz to 3 GHz
Input level range: –15 to +40 dBm (MAIN connector), –40 to +20 dBm (AUX connector)
Filters (3 dB cut-off frequency): HPF (300 Hz, 50 kHz), LPF (3 kHz, 15 kHz)
Modulation Deviation: 0 to 10 rad
Demodulation frequency: 300 Hz to 3 kHz
Accuracy: 1% + residual øM (modulation frequency: 1 kHz)
Frequency response: ±0.5 dB (referenced to 1 kHz)
Residual øM: 0.01 rad-rms (demodulation bandwidth: 0.3 to 3 kHz)
Distortion: 0.5% (modulation frequency: 1 kHz, demodulation bandwidth: 0.3 to 3 kHz, deviation: 5 rad)
FM demodulation output
Deviation: 0 to 40 kHz (4/40 kHz range selectable)
Demodulation frequency range: 50 Hz to 10 kHz
Output level: 4 Vpeak (EMF, at full-scale range)
Output impedance: 600
Ω
Frequency response: ±1 dB
Distortion: 1% (FM frequency: 1 kHz, demodulation bandwidth: 0.3 to 3 kHz, frequency deviation: 4 kHz)
Filters (3 dB cut-off frequency): HPF (300 Hz), LPF (3 kHz)
De-emphasis: 750 µs
Input impedance: 600
Ω
/100 k
Ω
selectable (unbalanced, BNC connector)
Bandpass filter
HPF: 400 Hz (for tone rejection)
De-emphasis: 750 µs
Weighting filter: ITU-T P.53, C-MESSAGE
AF Level meter
Frequency range: 30 Hz to 20 kHz
Level range: 1 mVrms to 30 Vrms
Audio analyzer Accuracy: ±0.5 dB
AF frequency counter
Frequency range: 30 Hz to 20 kHz
Level range: 30 mVrms to 30 Vrms
Accuracy: ±0.1 Hz
Distortion meter
Frequency range: 100 Hz to 5 kHz
Level range: 30 mVrms to 30 Vrms
Accuracy: ±1 dB (frequency: 1 kHz, distortion factor: 1%)
Mass Յ 500 g
14
T
ransmission measur
ement