Option 07: spectrum analyzer, Option 04: af low impedance output – Atec Anritsu_MT8801C User Manual

Page 15

Frequency

Frequency range: 0 Hz to 3 GHz (Band 0), 10 MHz to 3 GHz (Band 1)
HPF: On/off switchable (band 1, 1.6 to 3 GHz)

Frequency setting range: 0 Hz to 3 GHz (Band 0), 10 MHz to 3 GHz (Band 1)

∗

Resolution: 1 Hz

Accuracy

Frequency display accuracy: ± (display frequency x reference frequency accuracy + span x span accuracy)

Marker frequency accuracy

Normal marker: Same as display accuracy, Delta marker: Same as span accuracy

Frequency

Frequency span

Span setting range: 0 Hz or 10 kHz to 3 GHz (band 0), 0 Hz or 10 kHz to 2.99 GHz (band 1)
Span accuracy: ±2.5%

Resolution bandwidth

Setting range: 300 Hz to 1 MHz (3 dB BW), 1-3 sequence
Accuracy: ±2% (300 Hz to 300 kHz), ±10% (1 MHz)
Selectivity (60 dB : 3 dB):

≤

5 : 1

Video bandwidth: 3 Hz to 100 kHz (1-3 sequence), off

∗

Setting range is limited by resolution bandwidth.

Sideband noise:

–95 dBc/Hz (1 GHz, 10 kHz offset),

–115 dBc/Hz (1 GHz, 100 kHz offset)

Maximum input level

Continuous average power: +40 dBm (Main), +20 dBm (AUX)
DC voltage: 0 V

Average noise level (resolution bandwidth: 1 kHz, video bandwidth: 10 Hz)

–90 dBm (10 MHz to 2.2 GHz),

–85 dBm (

2.2 GHz)

∗

Main, input attenuator: 20 dB

–110 dBm (10 MHz to 2.2 GHz),

–105 dBm (

2.2 GHz)

∗

AUX, input attenuator: 0 dB

Residual response:

–70 dBm (Main, input attenuator: 20 dB),

–90 dBm (AUX, input attenuator: 0 dB)

Level accuracy:

±1.5 dB (Main, reference level: +10.1 to +40 dBm, 0 to –50 dB of reference level)
±1.5 dB (AUX, reference level: –9.9 to +20 dBm, 0 to –50 dB of reference level)

Reference level

Setting range: –60 to +50 dBm (Main), –80 to +30 dBm (AUX)
Setting resolution: 0.1 dB

Amplitude (band 1)

Accuracy: ±0.5 dB (Main, +10.1 to +40 dBm), ±1.0 dB (Main, –60 to +10 dBm),

±0.5 dB (AUX, –9.9 to +20 dBm), ±1.0 dB (AUX, –80 to –10 dBm)

∗

After calibration, frequency: 100 MHz, span: 2 MHz; Input attenuator, resolution bandwidth,
video bandwidth, and sweep time: AUTO

Resolution bandwidth switching error: ±0.1 dB (resolution bandwidth reference: 3 kHz)

Frequency characteristics: ±0.5 dB [100 MHz reference, input attenuation: 30 dB (10 dB for AUX), 18˚ to 28˚C]
Log linearity: ±0.5 dB (0 to –50 dB, resolution bandwidth:

1 MHz)

±1.0 dB (0 to –70 dB, resolution bandwidth:

30 kHz)

±1.0 dB (0 to –80 dB, resolution bandwidth:

1 kHz)

∗

Frequency: 10 MHz to 2.2 GHz, Reference level:

0 dBm (Main),

–20 dBm (AUX)

Spurious response:

–55 dBc (10 to 100 MHz),

–60 dBc (100 to 1500 MHz)

∗

2nd harmonic distortion at mixer input: –30 dBm

Sweep time: 100 ms to 1000 s (frequency domain sweep)

100 ms to 1000 s (time domain sweep, resolution bandwidth:

1 kHz)

10 ms to 1000 s (time domain sweep, 3 to 10 kHz)
1 ms to 1000 s (time domain sweep, resolution bandwidth:

30 kHz)

Trigger switch: FREERUN, TRIGGERED
Trigger source

WIDE IF VIDEO [bandwidth (3 dB):

20 MHz, trigger slope: RISE/FALL]

Sweep

EXT trigger level: TTL, trigger slope: RISE/FALL

Trigger delay

Range: 0 µs to 100 ms, Resolution: 2 µs

Gate sweep

Displays spectrum of input signal at specified gate on frequency domain display
Gate delay: 2 µs to 100 ms, Resolution: 2 µs
Gate width: 2 µs to 100 ms, Resolution: 2 µs

◆ Option 07: Spectrum analyzer

Output impedance

∗

Ω

(MAIN connector, unbalanced, BNC connector)

Maximum output current:

100 mApeak (MAIN connector)

AF oscillator

Waveform distortion:

–50 dBc (band:

30 kHz, 1 kHz, output level: 0.3 V),

–45 dBc (band:

30 kHz, 20 Hz to 20 kHz, output level: 0.3 V)

◆ Option 04: AF low impedance output

∗

Ω

fixed (can not exchange to 50/600

Ω

)