Atec Anritsu_MT8801C - Manual (Page 12)

12
GPIB Interface (standard)
All key operations except the power switch can be
controlled remotely.
RS-232C Interface (standard)
All key operations except the power switch can be
controlled remotely. The RS-232C interface can be
used with notebook computers not having a GPIB
port to configure a measurement system.
Parallel Interface (standard)
The parallel Centronics interface to print the MT8801C
screen to a printer.
Connection with DUT (2): PDC, PHS
For Configuration of Automated Measurement Systems
Spectrum Analyzer
MS2602A Printer
GPIB
MT8801C Personal computer
Printer
RS-232C, GPIB
MT8801C Personal computer
Centronics
MT8801C Printer
MT8801C
Data TTL level
DUT Clock
Level
TTL level
converter ✽
Controller*
Personal computer, etc. ✽ ✽Provided by user
Saving Screen
MT8801C screens can be saved to FD as bitmapped
files (exclusive use with printer connected to parallel
interface).
Example of bitmapped file
Connection with DUT (1): GSM, DECT
This setup also be used for IS-136A, CDMA, PDC and
PHS transmitter test.
MT8801C DUT
Connection with DUT (3): IS-136A
MT8801C DUT Controller*
Personal computer, etc. ✽
✽Provided by user