Alpha Technologies UPE-6 - Manual (Page 10)

10 031-124-C0-004, Rev. D
1.0 Introduction, continued
1.2 Precast Pad and Pedestal Mounting Options
44"
(1117.6mm)
32"
(812.8mm)
24"
(609.6mm)
18.5"
(469.9mm)
12.5"
(317.5mm)
10" (254mm)
2.5"
(63.5mm)
28" (71
1.2mm)
4" (101.6mm)
10"
(254mm)
.000" (0mm)
24" (609.6mm)
10"
(254mm)
15"
(381mm)
27"
(685.8mm)
34" (863.6mm)
8" x 11.36"
(203.2mm x
288.5mm)
Cutout
5.75" (146mm)
2.82" (71.6mm)
.000" (0mm)
14.12"
(358.6mm)
6" (152.4mm)
8.5"
(215.9mm)
2.82" (71.6mm)
Knockouts for UPE 3/6
Knockouts for
UPE 4/8
(not used)
Hole for 3/8" (9.5mm) -16
UNC insert,
shown for reference
Knockout for UPE 3/6 Knockout for UPE 4/8
(not used)
3"
(76.2mm)
.000" (0mm)
Fig. 1-2, Layout for Precast Pad, Single-wide for UPE-3 and -6
Alpha P/N 641-112-10
Top, Front view