ABUS FUBE50060 Secvest 2WAY Wireless Key Switch - Manual (Page 34)

34
8.6.2. Training and removing the alarm centre for the wireless
key switch
1. Switch your wireless key switch to learn mode.
2. Press the program button (15) six times. The display shows .
Keep the button pressed until the appears on the display.
3. After you release the button, a appears briefly on the display.
4. Learning mode is now active. You can now train a new Secvest
within the next 4 min.
5.
In installer mode, select “Other devices  Info Module  Teach
Info Module
”. Send the training signal from the wireless alarm
system to the wireless key switch.
6. When the training signal is received by the wireless key switch, it
emits a double tone.
7. Confirm successful learning procedure on the wireless alarm
system.
If you train a new Secvest wireless alarm system for the wireless key
switch, previously learned data is automatically deleted in the
wireless alarm system.