ABUS FUBE50060 Secvest 2WAY Wireless Key Switch - Manual (Page 29)

29
Delivery state of key-switch
User code “1234” is programmed
All 4 partitions are selected
Signal tones are activated
Reception time of 10seconds is programmed
8.1. Wireless key switch operating mode
Press the program button (15) once enter this submenu. The display shows
. Press and hold the button until the appears on the display.
The current programming is displayed after about 1 second (e.g. ). You
can now change this number by pressing the button several times. The
operating mode for operation as an arming station (FU5140) and wireless
info module (FU8200) is activated when a is displayed. A shows the
operating mode, operation as a 2WAY arming station (FU8110), on the
wireless key switch.
When the required value is reached, it can be saved by pressing the button
and holding it until appears on the display.
Note:
Operating mode , operation as an arming station (FU5140) and
wireless info module (FU8200), is compatible with all Secvest
versions.
Operating mode , operation as a 2WAY arming station (FU8110), is
compatilbe with Secvest 2WAY.