ABUS AZWG10000 Profiline GSM-Interface II - Manual (Page 46)

46 AZWG10000
11: Periodic test
12: Provider message
Description of command Options Default
F1RS…F8RS: Assignment of
resets
Assignment of resets to contacts 1: Input 1
2: Input 2
3: Input 3
4: Input 4
5: Tamper
6: PSTN fault
8: Main power loss
9: Low battery
V1RE…V4RE: Assignment of
voice messages
Assignment of voice messages to
contacts
1: Input 1
2: Input 2
3: Input 3
4: Input 4
5: Tamper
6: PSTN loss
8: Main power loss
9: Low battery
11: Periodic test 0
10.2.6 Diagnostics functions
The diagnostics functions are available to both the installer and the user (see also
11.5/11.6), so the user code (default: 1234) must be used here.
Description of command SMS structure
STATUS
Status of mains voltage, battery,
telephone line and GSM signal strength “CODE” “STATUS”
Example: 1234 STATUS
SFTR
Current software version of device “CODE” “SFTR”
Example: 1234 SFTR
SI
Status of inputs “CODE” “SI”
Example: 1234 SI
SU
Status of outputs “CODE” “SU”
Example: 1234 SU
CLK
Reply by SMS about device date and
time “CODE” “CLK”
Example: 1234 CLK
CLK
Change of device date and time
“CODE” “CLK” “dd/mm/yy,hh,mm”
Example: 1234 CLK 01/06/08,18,30