beautypg.com

ABUS AZ4230 Terxon LX 8-zone Wired Extension User Manual

Page 7

background image

7

1. Introduction

The 8-zone wired extension enables you to extend the system
with 8 additional wired zones and 2 programmable outputs. The
zones can be connected to all types of sensor.
You can connect up to 4 operating panels to an 8-zone wired
extension. The extension also permits the connection of 2
additional loudspeakers for acoustic alarm or service signals.

2. Installation

1. Disconnect the alarm centre from the power supply

(mains and battery).

2. Remove the housing screws of the extension module.

3.

Open the housing of the wired extension.

4. If the extension is to be integrated in the housing of the

alarm centre, unscrew the PCB from the base and fix it
to the housing with self-adhering feet. Jumper the
tamper switch by connecting a jumper as described on
the next page.

5. If the extension is to be installed at a distance from the

alarm centre, use the base as a drilling template. Draw
the cables through the base and fix the base to the wall.

6. Connect all cables and set the jumpers and switches as

described on the next page.

7. Clamp the front plate to the housing and screw it tight.