NXG Technology NX-RM610 - Manual (Page 24)

Note: If a number is repeated when setting the channel
(for example, channel “33” or “522”) it is usually best to set a
half second delay in between the identical numbers by pressing the
PAUSE button. Each press of the PAUSE button increases the delay
by a half second.
7 Press the Channel UP button to SAVE your macro. The screen
returns to the SETUP menu.
8 Press the MAIN button twice to return to normal operation.
NX-RM610
22
Use the PAUSE Button to
set delays between steps,
each press of the pause
button increases the
delay by a half second.
NX-RM610_Remote_Manual 10/6/08 4:05 PM Page 24