NXG Technology NX-RM610 - Manual (Page 10)

NX-RM610
8
SAVE
Button
MAIN
Button
Scan Up to the
next Code Number
Press Power
On or Power
Off to test if
the device
powers off.
Down to the
previous Code
Number
Note: If a component fails to turn off after you have entered all of
the code numbers listed for your brand your component might
actually be manufactured by another brand. You can scan through
the other brands in the table using the UP and DOWN buttons to
change the code number displayed, then tapping either the Power
ON, OFF or any other button to see if the component responds to
any command. Alternatively, you can opt to use the Learning
Method on Page 9 if you can’t find a code set in the
built-in database.
8 When the component turns off, save the code number you entered
by pressing the SAVE button that appears on the screen.
9 Exit SETUP mode by pressing the MAIN button two times. When the
display shows “MAIN”, you are back in normal operating mode.
Code Number
You Entered
NX-RM610_Remote_Manual 10/6/08 4:04 PM Page 10