NXG Technology NX-RM610 - Manual (Page 23)

21 Favorite Channel Setup
Imagine surfing all your favorite channels, without ever typing in a
channel number. By simply setting up each of the favorite channel
but-tons, you can make TV, cable or satellite operation fun and
easy. To setup a Favorite Channel button, follow these steps:
1 Enter SETUP mode by pressing and holding both MAIN and ENT for
three seconds.
Note: You have 30 seconds for each step, otherwise the NX-RM610
will time out automatically.
2 Press the FAV display button.
The top of the display will show “FAV”. The bottom of the display
will flash “SELECT”.
3 Use the PAGE or FAV buttons until you can see the name (i. e. ,
ABC, CBS, NBC) of the favorite channel you wish to setup.
Press the favorite channel button you wish to setup.
4 The top of the screen changes to show the channel name. The
bottom of the screen displays”STEP0”, indicating that you have
not entered the channel number yet.
5 Press either the TV, SAT or CABLE Device button (select the
device you use to enter channel numbers).
6 Press each of the number buttons for the channel.
Note: Some brands of television (for example: SONY) require an
ENT (Enter) command after the channel numbers for the favorite
macro to work correctly.
NX-RM610
21
FAV
Button
NX-RM610_Remote_Manual 10/6/08 4:04 PM Page 23