Advanced setup, Editing button labels – NXG Technology NX-RM610 User Manual
Page 18
NX-RM610
16
Advanced Setup
After you’ve finished all your basic setup, you can choose to make
operation easier by customizing the NX-RM610 just the way you
want, using the Advanced Setup features described in this section.
Editing Button Labels
You can change the name of any of the display buttons (including
Favorite Channels) by following these steps:
1
Press and hold both the MAIN and ENT (Enter) buttons for
approximately three seconds. The top of the display will show
“SETUP”. You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in
SETUP mode. If you don’t press a button within that time, the
NX-RM610 will time out and return to normal operation.
2
Press the EDIT button.
3
The display changes to the EDIT menu. Press the TEXT button.
Note: The screen displays the list of devices and “EDIT” will
appear at the top of the screen.
TEXT
Button
EDIT
Button
NX-RM610_Remote_Manual 10/6/08 4:04 PM Page 18