Extron Electronics SW HDMI LC User Guide - Manual (Page 22)

SW HDMI LC • Remote Communication and Control 16
Command
ASCII Command
(host to unit) Response
(unit to host)
Additional Description
Request information, part number, and firmware version (continued)
Request part number N 60-xxxx-01
] Show the switcher part number:
SW2 HDMI LC: 60-1159-01
SW4 HDMI LC: 60-1160-01
Query firmware version Q X% ]
Show the current firmware build number
X%
,
expressed to the second decimal place.
Example: Q 1.01 ]
Query auto-input switch status 72# Asw
X@ ] Show On or Off status of auto-input switching.
For
X@
:
0 = disabled
1 = enabled
Reset
Reset E
ZXXX
}
Zpx
] Reset the switcher to its factory default values.
Upload firmware
Upload firmware E
Upload
} ...go
Upl
]
Upload a new firmware version from the
computer. “Upl” appears after the upload is
complete.
Command/response Table for SIS commands, Continued