Sis command, Ocessing product control pr – Extron Electronics PowerCage FOX SR HDMI User Guide User Manual
Page 24
Command and response table for SIS commands (continued)
PowerCage FOX SR HDMI Scaling Receiver • Remote Control
18
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional description
Test pattern
Output color bars
E
1Test
}
Test1
]
Set the unit to output the color bars test pattern.
Output grayscale
E
2Test
}
Test2
]
Set the unit to output the grayscale test pattern.
Output crosshatch
E
3Test
}
Test3
]
Set the unit to output the crosshatch test pattern.
Output alternating pixels
E
4Test
}
Test4
]
Set the unit to output the alternating pixels test pattern.
Output crop
E
5Test
}
Test5
]
Set the unit to output the crop test pattern.
Turn test pattern off
E
0Test
}
Test0
]
Set the unit to output the input video (no test pattern
is selected).
Show test pattern status
E
Test
}
X1$]
View the current test pattern.
Memory presets
Save preset
X1#
,
Spr
X1#]
Command code is a comma.
Recall preset
X1#
.
Rpr
X1#]
Command code is a period.
Auto memory
Disable auto memory
E
0Amem
}
Amem0
]
Enable auto memory
E
1Amem
}
Amem1
]
Default condition.
Show auto memory status
E
Amem
}
X1@]
Audio mute
Mute the audio
1Z
Amt1
]
Silence the audio output of the receiver.
Unmute the audio
0Z
Amt0
]
The receiver outputs audio.
Show audio mute status
Z
X1@]
Audio mute status is
X1@
.
Disable and enable return link and daisy chain
Disable return link
66*0*0#
Rle*0*0
]
Disable link 2.
Enable return link to
transmitter
66*0*1#
Rle*0*1
]
Enable link 2 (default setting).
Enable daisy chain
66*0*2#
Rle*0*2
]
Enable receiver daisy chain mode.
Show return link and daisy
chain status
66*0#
0*
X1%]
HDCP notification
Enable notification
E
N1HDCP}
HdcpN1]
Default condition.
Disable notification
E
N0HDCP}
HdcpN0]
View notification status
E
NHDCP}
X1@]
Video shutdown delay
NOTES:
•
The Set Video Delay command delays the digital video to help monitors sync correctly during an input rate change.
•
Only video is delayed; embedded audio is not delayed.
Set delay
3*
X1^
#
Dly
X1^]
Delay video by an interval of
X1^
.
Example:
3*3#
Dly3
]
Delay video by an interval of 0.75 seconds
(3 x 0.25 seconds).
View delay
3#
X1^]
NOTE:
X1@
= Auto memory, mute, and HDCP notification status
0 = off
1 = on
X1#
= Memory preset number
01 to 30
X1$
= Test pattern
0 = none
3 = crosshatch
1 = color bars
4 = alternating pixels
2 = grayscale
5 = crop
X1%
= Rx link and daisy chain enable
0 = disable both
1 = enable return link
2 = enable daisy chain
X1^
= Video delay
0 = 0 second
(0 plus six steps at 0.25 seconds per step)
1 = 0.25 second
3 = 0.75 second
5 = 1.25 second
2 = 0.5 second*
4 = 1.0 second
6 = 1.5 second
* = default