Extron Electronics MLM-WB+ - Manual (Page 13)

MLM-WB+ • Installation 7
Components, Hardware, and Required Tools
The illustrations in this section identify the components of the MLM-WB+ and the
mounting hardware provided with it. Also included is a list of tools required to perform
the installation. The installation steps in this section refer to these components,
hardware, and tools.
Main MLM-WB+ Components
Adjustable Clamp Brackets
Extension Damper
12" (30.5 cm) and 16" (40.6 cm)
OC Spaced Mounting Slots
Cable Opening (2 per side)
Cable Tie Holes
Removable Side Panel
(to access cable channel)
Clevis Bracket
(for door leveling adjustment)
Rubber Stop
4U Rack Enclosure
Work Space/
Equipment Cover (Max. 15 lb [7 kg])
2U Rack Enclosure
Figure 5. MLM-WB+ Main Components
Included Mounting Hardware
The following mounting hardware is included with the MLM-WB+:
(6) 1/4" x 1 3/4" Masonry Screws
#40-373-01
(6) 1/4" x 1" O.D., 5/16"
I.D. Metal Washers #40-376-01
(6) #14 x 1 3/4" Self-tapping
Metal/Wood Screws #40-372-01
(4) 1/4-20 x 2"
Pan Head Bolts
#40-375-01
(4) 1/4" Kap Toggle
Assemblies #40-374-01
Figure 6. Mounting Hardware