Extron Electronics MTP R 15HD RSA D User Guide - Manual (Page 16)

MTP R 15HD RSA D • Installation and Operation 12
Use the supplied tie-wrap to strap the power cord to the
extended tail of the connector.
Alternatively, an optional Extron PS 124 Universal 12 VDC
Power Supply (part #60-1022-01) can power multiple Extron
12 VDC devices using only one AC power connector.
TP cable termination
N RJ-45 termination with CAT 5, CAT 5e, or
CAT 6 cable must comply with the TIA/EIA T568A or
TIA/EIA T568B wiring standards for all connections.
RJ-45 termination with Skew-Free A/V UTP cable must
comply with TIA/EIA T568A only.
Figure 6 , on page 13, details the recommended termination of TP
cables with RJ-45 connectors in accordance with the
TIA/EIA T568A or TIA/EIA T568B wiring standards. You can
use either standard with CAT 5/5e/6 cable, but ensure that you
use the same standard on both ends of the cable.
N The audio data that may be carried on wire pair 3 and 6
is incompatible with the Extron TPX 88A, which cannot
switch the audio, output it locally, or break it away.
N Enhanced Skew-Free A/V cable is not recommended
for Ethernet/LAN applications. This cable is specially
designed for compatibility with Extron Twisted Pair
products that are wired using the TIA/EIA T568A
standard.
The green, brown, and blue wire pairs of this cable
have virtually identical lengths and should be used to
transmit the RGB signals.
The orange wire pair of this cable has a different length
and should not be used to transmit the RGB signals.