Extron Electronics MS9400 HD FrEND - Manual (Page 37)

MS9400 HD FrEND User Guide Chapter 6: Remote Control Protocol
37 Rev. 1.54
CONFIGURATION COMMANDS:
GetPlayerType
This command requests the type of player.
The player will respond with
PlayerType
Where
String1 = A product from the MediaSonic Player Type list below.
Number = software version. The software version will be a numerically increasing version number
Player Type Description
MS9300SD Single channel SD FrEND.
MS9100HD 9100 series based HD players
MS9200HD 9200 series based HD players.
MS9400HD 9400 series based HD players.
GetChannelCount
This command requests the number of channels present on the player.
The player will respond with
ChannelCount
RunScheduler
Syntax: RunScheduler 0 (Stop Event Scheduler) RunScheduler 1 (Run Event Scheduler)
This command enables the Event Scheduler. The ‘System’ menu will display a Check symbol (or not) next to
‘Enable Scheduler’ depending upon its previous state.
The player will respond with
OK