Extron Electronics MS9400 HD FrEND User Manual
Page 25

MS9400 HD FrEND User Guide
Chapter 3: Data Transfer
25 Rev.
1.54
2. At the command prompt enter: ftp XXX.XXX.XXX.XXX (where X…X is the IP address of the MS9400
from the ‘System Options’ menu: Set IP (Step 8 in the previous chapter). Press Enter/Return.
The following will be displayed as soon as the local computer is connected to the MS9400:
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
3. Enter the User Name: hdclipftp (case sensitive), press Enter/Return when prompted.
4. Enter your password: mediasonic (case sensitive), press Enter/Return when prompted.
5. IMPORTANT! Type binary in the command line and press enter/return. This ensures that data is
transferred to the MS9400 correctly.
6. Type: dir in the command line, press Enter/Return. The application will display the MS9400 server file
/media folder:
7. Type: put path\filename and press Enter/Return to send a file from the local computer to the MS9400.
NOTE: MPEG video file sizes may be very large. The time taken to up-load will be dependent on the file
size as well as the bandwidth of your network connection. Check for the ‘Transfer Complete’ message as
shown above to ensure that your files have completely transferred to the MS9400 before trying to play
them.
8. Type: quit or bye to exit.
9. Close the DOS window.
Having transferred your program material to the MS9400 you can now play your video files safely.
Refer to Chapter 4: Playing Files for more information.