Extron Electronics FOX II T_R DP User Guide - Manual (Page 33)

FOX II DP Transmitter and Receiver • Remote Control 27
Product Configuration Software
The Extron Product Configuration Software, which communicates with the connected
transmitter or receiver via the rear panel Remote RS-232 port or front panel Configuration
USB port of that unit, provides an easy way to operate and configure the unit.
The program is compatible with Windows 2000, Windows XP, or later. Updates to this
program can be downloaded from the Extron website.
Installing the Software
The Product Configuration Software, version 1.4 or newer, and Firmware Loader are available
on the Extron website. Download and install both programs as follows:
NOTE: Steps 1 through 6, below, are also used to download firmware update packages.
1. Visit the website www.extron.com and click the Download tab (see figure 14).
3
1
2
2
— OR —
5
4
6
Figure 14. Downloading a Software or Firmware Package
2. Click the Software or Firmware link as appropriate to the operation you are performing.
3. Select the desired software or firmware file to download and click Download .
TIP: Jump to the nearest page of downloads by clicking the desired filtering letter.