Extron Electronics DSC 301 HD User Guide User Manual
Page 39
Command
ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Advanced Configuration
Test pattern
Set test pattern
E
X1*
TEST}
Test
X1*]
Set the test pattern to
X1*
.
View test pattern
E
TEST}
X1*]
View the current test pattern.
Freeze
Enable
1F
Frz1]
Freeze selected input.
Disable
0F
Frz0]
Unfreeze selected input.
View
F
X(]
Show the freeze status.
Input aspect ratio (per input)
Enable Fill mode
E
X!
*1ASPR}
Aspr
X!
*1
]
Sets input
X!
to always fill the entire
raster (default).
Enable Follow
mode
E
X!
*2ASPR}
Aspr
X!
*2
]
Sets input
X!
to preserve its native
aspect.
View aspect setting
E
X!
ASPR}
X2$]
View aspect ratio setting for input
X!.
Auto switch mode
Disable
E
0AUSW}
Ausw0]
Manual switching only (default).
Priority to highest
active
E
1AUSW}
Ausw1]
Gives priority to the highest numbered
active input.
Priority to lowest
active
E
2AUSW}
Ausw2]
Gives priority to the lowest numbered
active input.
View setting
E
AUSW}
X3@]
View the current auto switch mode.
Video effect
Cut
E
0SWEF}
Swef0
]
Sets the switch to cut.
Fade though black
E
1SWEF
}
Swef1
]
Sets the switch to fade through black.
View setting
E
SWEF
}
X2(]
View setting.
Front panel security lockout (Executive Mode)
Enable Executive
mode 1
1X
Exe1
]
Lock entire front panel.
Enable Executive
mode 2
2X
Exe2
]
Limited front panel adjustments (input
selection) can be made.
Disable Executive
mode
0X
Exe0
]
Unlock front panel controls. All front
panel adjustments can be made.
View Executive
mode status
X
X2@]
View the current status.
NOTE:
X!
= Input selection:
1
to
3
X(
= Enable or disable:
0
= Off/ or disable,
1
= On or enable
X1*
= Test patterns:
0
= Off (default),
1
= Crop,
2
= Alternating pixels,
3
= Crosshatch,
4
= Color bars,
5
= Grayscale
6
= Blue mode,
7
= Audio Test (crop pattern, OSD text “Audio Test”, pink noise; Ch 1/2, 48 kHz, 24 bit)
X2@
= Executive mode:
0
= Off or disable (default),
1
= Exec mode 1 (complete panel lockout),
2
= Exec mode 2 (partial lockout- input switching only).
X2$
= Aspect ratio:
1
= Fill; each input rate will automatically fill the entire output raster (default)
2
= Follow; each input rate will be displayed with its native aspect ratio
X2(
= Video switching effect:
0
= Cut,
1
= Fade through black (default)
X3@
= Auto switch mode:
0
= Disable (default),
1
= Priority to highest numbered input,
2
= Priority to lowest numbered input
DSC 301 HD • SIS Communication and Control
33