Extron Electronics CS 120P User Guide - Manual (Page 32)

Installing the CS 120P in a Hard Ceiling
If you are installing the CS 1226T in a hard ceiling (having no ceiling tiles), with the ceiling
structure in place, install the CS 120P:
• It is the responsibility of the installer to identify a suitable mounting location and provide
the mounting hardware.
• The CS 120P must be mounted as close as possible to the upper surface of the ceiling
material.
• The lip of the CS 120P should protrude into the hole cut for the speaker.
• Do not leave a gap between the CS 120P and the ceiling material.
NOTE: Installation in this type of ceiling must be done while access to the ceiling is
still possible.
CS 26T and CS 120P User Guide • Installation 26