YSI pHotoFlex STD Colorimeter - Manual (Page 55)

pHotoFlex
®
STD Operation
55 ba76122e01 02/2013
4.8 Reset
You can reset (initialize) all system and measurement settings.
4.8.1 Resetting the system settings
With the System / Reset function, all resettable settings are reset.
 Settings for Photometry (see section 4.8.2)
 System settings
4.8.2 Resetting the photometry settings
With the Photometry / Reset function, all photometry settings are reset.
System setting Default settings
Baud rate 4800 Baud
Output format ASCII
Illumination Auto off
Contrast 50 %
Brightness 50 %
Switchoff time 30 min
Beep On
Setting Default settings
PROG 0
Cell size 16 mm
Meas. param. Concentration
Wavelength 436 nm
Blank values all erased