YSI pHotoFlex STD Colorimeter - Manual (Page 48)

Operation pHotoFlex
®
STD
48 ba76122e01 02/2013
4.6.1 Storing measurement datasets
Proceed as follows to transmit to the data memory and simultaneously
output to the interface a measurement dataset:
. It is stored with the ID last set.
If the memory is full You can erase the entire memory (see section 4.6.5), or overwrite the
oldest dataset with the next storing procedure.
A security prompt appears before a dataset is overwritten.
1 Press the key.
The Store display appears.
2 Using <> <>, and the number keys,
change and confirm the ID number (ID) as necessary (0 ...
999).
3 Using or , confirm Store.
The dataset is stored. The meter switches to the measured val-
ue display.
i01.12.2011 15:10:11
PROG 86
1.12 mg/l NH4-N
[BV]
assign ID:
1
Store (ID: 1:
Store ( 996 free )