YSI pHotoFlex STD Colorimeter - Manual (Page 53)

pHotoFlex
®
STD Operation
53 ba76122e01 02/2013
Output format, CSV
Data Explanation
1 No. Current number of the storage location (or "0"
during output from measured value display)
2 Date Date of storing
3 Time Time of storing
4 ID adjusted ID
5 Program number only for the measured parameter, Concentration
6 Citation form only for the measured parameter, Concentration
7 Blank value for the measured parameter, Concentration: [BV]
8 Dilution only for the measured parameter, Concentration
9 Main measured
value  Measured value or
 Upper/lower measuring range limit
(only with measured value status, OFL/UFL)
10 Unit of 9 Unit of the measured value
11 Measured value
status of 9  VALID: Measured value valid
 INVALID: Measured value invalid
 UFL: Measured value below the lower mea-
suring range limit
 OFL: Measured value above the upper mea-
suring range limit
12 Secondary mea-
sured value
or
Standard adjust-
ment
 for the measured parameter, Absorbance%
Transmission: Wavelength of measurement
 for the measured parameter, Concentration:
Status standard adjustment [Cal]
13 Unit of 12 Unit of the measured value
14 Measured value
status of 12 VALID, INVALID, UFL, OFL (see point 11)
0;01.12.11;14:18:07;1;81;O2;[BV];[2 + 1];166;mg/l;VALID;;;
14;03.12.11;07:41:51;3;;;;;24.8;%;VALID;557;nm;VALID
2 1 3 4 5 6 7 8 9
12
10
13
11
14