YSI pHotoFlex STD Colorimeter - Manual (Page 24)

Operation pHotoFlex
®
STD
24 ba76122e01 02/2013
The correct setting of the date and time and date format is important for
the following functions and displays:
 Current date and time
 Calibration date
 Identification of stored measured values.
Therefore, check the time at regular intervals.
After a fall of the supply voltage (empty batteries or rechargeable bat-
tery), the date and time are reset to 01.01.2003, 00:00 hours.
Setting the date, time
and date format
The date format can be switched from the display of day, month, year
(dd.mm.yy) to the display of month, day, year (mm/dd/yy or mm.dd.yy).
1 In the measured value display:
Using
The instrument is in the configuration mode.
2 Select and confirm the System / Continue ... / Date/time menu
with <> <> and .
3 Select and confirm the Time menu with <> <> and
.
A display for the entry of numerals with the number keys opens
up.
Time : 14:53:40
Date : 01.02.05
Date format : dd.mm.yy
Date/time
14:53:40
Time