YSI pHotoFlex STD Colorimeter - Manual (Page 21)

pHotoFlex
®
STD Operation
21 ba76122e01 02/2013
4.3.2 Navigation
Measured value display In the measured value display, you can
 select the measured parameter with :
– Concentration
– Absorbance
– % Transmission
 open the menu with
Menus and dialogs The menus for settings and dialogs in procedures contain further sub-
elements. The selection is made with the <> <> keys.
The current selection is highlighted as white text on a black back-
ground.
 Menus
The name of the menu is displayed at the upper edge of the frame.
Menus are opened by confirming with . Example:
 Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. With , the selection of the
possible settings is opened. Subsequently, the setting can be
changed with <> <> and .
Example:
 Functions
Functions are designated by the name of the function. They are im-
mediately carried out by confirming with .
Example:
Photometry
Timer
System
Info
Configuration
Illumination : Auto off
Contrast : 50 %
Brightness : 50 %
Display