beautypg.com

2 configuring the rs232 interface, 3 selecting the output format of datasets, Configuring the rs232 interface – YSI pHotoFlex STD Colorimeter User Manual

Page 52: Selecting the output format of datasets

background image

Operation

pHotoFlex

®

STD

52

ba76122e01

02/2013

Socket assignment

4.7.2

Configuring the RS232 interface

For an error-free data transmission, the RS232 interface should be set
to the same transmission speed (Baud rate) for the pHotoFlex

®

STD

and PC.

You can set the following values for the baud rate on the
pHotoFlex

®

STD : 1200, 2400, 4800, 9600, 19200.

The baud rate is selected in the menu, Configuration / System / Inter-
face
/ Baud rate.

4.7.3

Selecting the output format of datasets

For downloading data to the interface you can select the output format.

It is selected in the menu, Configuration / System / Interface / Output
format
.

The ASCII output format delivers formatted datasets.
The CSV output format delivers datasets separated by ";".

Output format, ASCII

RS 232
REC

1

3

4

5

6

2

1 RTS
2 RxD
3 TxD
4 DTR
5 SG
6 CTS

pHotoFlex Ser. no. 12345678
01.12.11 09:56:20
ID 1/ PROG 83
1.74 mg/l NH4-N [BV]
________________________________________

03.12.11 14:01:57
ID 2/ PROG 81
176 mg/l O2 [BV]
________________________________________

etc...