YSI pHotoFlex STD Colorimeter - Manual (Page 31)

pHotoFlex
®
STD Operation
31 ba76122e01 02/2013
4.4.2 Display
In the Configuration / System / Display menu, you set the display fea-
tures:
 Switching on/off the display illumination (Illumination)
 Display contrast (Contrast)
The settings can be found in the Configuration / System / Display menu.
To switch to the Configuration menu, press the
Settings
4.4.3 Interface
In the Interface menu, you set the features of the interface:
 Transmission speed (Baud rate)
 Output format (Output format)
The settings can be found in the Configuration / System / Interface
menu.
To switch to the Configuration menu, press the
Settings
4.4.4 Date/time
Menu item Setting Explanation
Illumination Auto off The display illumination is
automatically switched off if
no key has been pressed
for 30 seconds.
On
Off
Switches the display illumi-
nation on or off permanent-
ly (see section 4.5.9)
Contrast 0 ... 100 % Changes the display con-
trast
Brightness 0 ... 100 % Changes the display bright-
ness
Menu item Setting Explanation
Baud rate 1200, 2400,
4800, 9600,
19200 Baud rate of the data inter-
face
Output format ASCII
CSV
Output format for data
transmission
For details, see section 4.7