YSI pHotoFlex STD Colorimeter - Manual (Page 50)

Operation pHotoFlex
®
STD
50 ba76122e01 02/2013
4.6.3 Displaying measurement datasets
You can read out stored datasets to the display. Only those datasets
are displayed that correspond to the selected filter criteria (see
section 4.6.2).
Start reading out the data to the display in the menu, Configuration /
System / Measured value memory / Display.
Representation of a
dataset
Further datasets that correspond to the filter criteria are displayed with
the <> <> keys.
Quitting the display To quit the display of stored measurement datasets, you have the fol-
lowing options:
 Switch directly to the measured value display with (short pres-
sure).
 Leave the display and switch to the superordinate menu with
or .
4.6.4 Download the measurement datasets to the
RS232 interface
You can download stored datasets to the RS232 interface. Only those
datasets are downloaded that correspond to the selected filter criteria
(see section 4.6.2).
The datasets are downloaded in the specified output format (see
section 4.7.3).
The data download to the interface is started in the menu, Configura-
tion / System / Measured value memory / RS232 download.
8: 02.12.2011 10:04:47
ID 0 / PROG 86
11.4 mg/l NH4-N
[BV] [1 + 1]
iScroll with ▲ ▼
Measured value memory