Armasight NAMPVS1401F9DA1 PVS14 FLAG MG Multi-Purpose Night Vision Monocular - Manual (Page 34)

34
(11) Insert the top edge of the mount under the keeper on the helmet mount bracket and rotate down-
ward until the latch engages (see Figure 3-13). To release the mount from the helmet bracket, press the
release and pull forward and down.
3.3.9. INSTALLATION OF HEADMOUNT WITH PROTECTIVE MASK
Perform the following procedures for donning headmount with protective mask.
(1) Place protective mask on your head per the instructions provided with the protective mask.
KEEPER
HELMET
MOUNT
BRACKET CATCH
BUCKLE
LEVER
STRAP
REAR
SNAP
REAR
MOUNTING
HOLE
REAR
BRACKET
NAPE
STRAP
Figure 3-11. Installation of Helmet Mount
TOP EDGE
OF MOUNT
MOUNT
RELEASE
KEEPER
HELMET
MOUNT
BRACKET
STRAP
MOUNT IS ROTATED
90° FOR CLARITY
Figure 3-12. Helmet Mount
TOP EDGE
OF MOUNT
MOUNT
RELEASE
KEEPER
HELMET
MOUNT
BRACKET
LATCH
Figure 3-13. Reassembly of Helmet Mount