Safety summary – Armasight NAMPVS1401F9DA1 PVS14 FLAG MG Multi-Purpose Night Vision Monocular User Manual
Page 2

2
The information provided in this manual is for familiarization purposes only; the contents may undergo further
changes with no commitment by Armasight© to notify customers of any updates.
Armasight© assumes no responsibility for any misprints or other errors that this manual may contain.
©2012 by Armasight. All rights reserved.
SAFETY SUMMARY
Before operating this product, carefully read and study this Operation and Maintenance Manual.
The PVS-14 and 6015 is a precision electron-optical instrument, and requires careful handling. To avoid
damage to the equipment or physical harm to the user when operating the PVS-14 and 6015, follow all
WARNINGS, CAUTIONS and NOTES.
Below you will find definitions of the following alerts that appear throughout this Manual:
WARNING — Identifies a clear danger to the person operating the equipment.
CAUTION – Identifies risk of damage to the equipment.
NOTE – Serves to highlight essential procedures, conditions, and statements, or convey important in-
structional data to the user.
WARNING:
This product contains natural rubber latex which may cause allergic reactions! The FDA
has reported an increase in the number of deaths that are associated with an apparent sensitiv-
ity to natural latex proteins. If you are allergic to latex, it is a good idea to learn which products
contain it and strictly avoid exposure to those products.
WARNINGS:
Toxic Material
The image intensifier’s phosphor screen contains toxic materials.
• If an image intensifier breaks, be extremely careful to avoid inhaling the phosphor screen
material. Do not allow the material to come in contact with the mouth or open wounds on the
skin.
• If the phosphor screen material contacts your skin, wash it off immediately with soap and
water.
• If you inhale/swallow any phosphor screen material, drink a lot of water, induce vomiting, and
seek medical attention as soon as possible.
WARNINGS:
• The monocular will not be turned off automatically when flipped up. The monocular must be
turned off by the power switch.
• The compass illuminator can be seen by others using night vision devices.
• Do not use contaminated eyecup or eyeguard. They must be replaced.
• When installing the headmount over the protective mask, be careful not to break the protec-
tive mask seal around your face.
- NAMPVS1401G9DA1 PVS14 GEN 3 Ghost MG Multi-Purpose Night Vision Monocular NAMPVS1401P9DA1 PVS14 GEN 3P MG Multi-Purpose Night Vision Monocular NAMPVS140139DA1 PVS14 GEN3 Alpha MG Multi-Purpose Night Vision Monocular NAMPVS140139DB1 PVS14 GEN3 Bravo MG Multi-Purpose Night Vision Monocular NAMPVS1401Q9DI1 PVS14 GEN 2+ QS MG Multi-Purpose Night Vision Monocular