2 pcipnp pcipnp pcipnp pcipnp pcipnp – Asus K8N4-E DELUXE User Manual

Page 88

4 - 2 2

C h a p t e r 4 : B I O S s e t u p

4.4.2

PCIPnP

The items in this menu show the PCIPnP configuration settings. Select an
item then press to display a pop-up menu with the configuration
options.

Plug & Play O/S

[No]

Init Display First

[PCI Slot]

Resources Controlled By

[Auto]

x IRQ Resources

PCI/VGA Palette Snoop

[Disabled]

Select Menu

Item Specific Help

Select Yes if you

are using a Plug and

Play capable system.

Select No if you

need the BIOS to

configure non-boot
devices.

PCIPnP

Plug & Play OS [No]

When set to [No], the BIOS configures all the devices in the system. When
set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for
boot. Configuration options: [No] [Yes]

Init Display First [PCI Slot]

Allows you to select which graphics controller to use as the primary boot
device. Configuration options: [PCI slot] [PCIEx]

Resources Controlled By [Auto]

When set to [Auto], the BIOS automatically configures all the boot and
Plug and Play devices. Set to [Manual] if you want to assign the IRQ DMA
and memory base address fields. Configuration options: [Auto] [Manual]

When the item R e s o u r c e s C o n t r o l l e d B y

R e s o u r c e s C o n t r o l l e d B y

R e s o u r c e s C o n t r o l l e d B y is set to [Auto], the item

IRQ Resources is grayed out and is not user-configurable. Refer to the
section “IRQ Resources” for information on how to enable this item.